Get the best of both worlds with the brand new ATOM marine line of amplifiers. Miniature in size but mighty in output! Built-in Bluetooth and a voltmeter are just two of these' many handy extras.

High-quality marine parts, such as a PCB board with conformal coating and waterproof adhesive, are used in this amplifier. Both the top and bottom plates of the heat sink are composed of corrosion-resistant stainless steel. All of the amp's internal mounting screws and hardware, as well as the amp's end panels, are constructed of stainless steel, making them rustproof as well. The amplifier will never rust and will perform as well as the day you bought it, even after years of use.

Class D 8-Channel high power amplifier producing 3,500 watts peak and 880 watts RMS, the ATOM 8B is an excellent choice. This amplifier really packs a punch. It's loud enough to be heard over traffic and wind noise and can power many zones. It is possible to compare the peak rating to similarly rated products from companies like Boss and Power Acoustik, while the Dyno Certified RMS rating can be used to evaluate products from industry leaders like Kicker, Rockford, Alpine, etc.

This amplifier is equipped with a sweet 12 dB per octave crossover that can be tweaked to your liking. The wonderful thing about the crossover is that it can function as a low pass, full, or high pass. This means that our amplifier is well-suited for use with a wide variety of speakers, from woofers to midranges to tweeters. To eliminate low-frequency noise, go to high pass mode (cut-off frequency adjustable between 50Hz - 250 Hz). By switching to low pass, you can eliminate higher frequencies (cut-off frequency adjustable between 50Hz - 250 Hz). When set to "full," no frequencies will be filtered out. Thanks to our cutting-edge crossover technology, you can precisely adjust the sound of each individual speaker.

The fact that this amplifier features not one but two crossovers is also really neat. Separate high-tech filters are available for each of the four channels.

You may use something like:

Four full-range speakers, channels 1-4. (in full mode)
Subwoofers use channels 5, 6, 7, and 8. (in low pass mode)
The ATOM 8B prevents damage to your amplifier and speakers by powering on gradually, thanks to its mute, delay, and soft start technology, which is controlled by an integrated circuit.

Features:

An eight-channel amplifier with a 3500 peak power output and an 880 watt RMS rating; Rockville ATOM 8B is Dyno-certified.
An Amplifier Designed for Use in the Marine Environment and Featuring Bluetooth
Ultra-high power output in a small package (Don't let the amp's small form deceive you; it packs a serious punch.)
Peak: (Use these ratings when comparing with the best budget manufacturers such as Boss, Power Acoustik, etc) (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)
Power Supply Capacity: 3500 Watts
Ratings of Root-Mean-Square Power (RMS) Proven by Certified Dyno Testing (less than 1% Total Harmonic Distortion) (Use these scores to contrast with industry leaders like Kicker and Rockford Fosgate.)
Standard Mean Squared Power Output at 4 Ohms: Eighty watts times seventy
Maximum RMS Power Output (at 2 Ohms): 110 Watts (8 Channels)
Amount of Bridged RMS Power Output at 4 Ohms: With a total of 220 watts across four channels
Amp with voltage readout
Channel configurations of 8, 6, and 4 can be selected.
In a Wireless, Bluetooth, Auto-Pairing Manner
A Signal Is Exported To The RCA Line
The silk screen, heat sink enclosure, and UV/salt water-resistant paint all contribute to the 80A fuse rating.
The Conformal Coating on Marine-Grade Boards Prevents Corrosion from Salt Spray and Humidity.
This amplifier's bottom plate, mounting hardware, and end caps are all made from stainless steel, making it extremely weather-resistant.
Modal Switch for 4CH/8CH Input
Controls for Crossover Independent of Cytochrome P450 (CH1-4) and Cytochrome P450 (
Capable of being Set to Full Range, Low Pass, or High Pass Filters
Variable High-Pass Filter: 50Hz - 250Hz @ 12dB/per Octave
A low-pass filter that may be adjusted from 50 to 250 hertz at a slope of 12 dB per octave is provided.
Adjustable Bass Equalization from 0 to 12dB @ 45Hz
LED Indicator for Operating Mode Status
Topology for Class D Digital Audio
Supply of Power with High-Speed MosFET Transistors
Integrated Circuit for High-Quality Studio-Level Output Stage
Microscale Design Using Surface-Mounted Components
Anodized, corrosion-resistant, black hairline-finish aluminum housing
To the Marine Electronics Standards set out by the American Boat and Yacht Council (ABYC)
Protection Logic for a Four-Way System (DC, Short, Thermal, Overload)
Heat-sink made of rugged aluminum alloy
RCA Jacks That Won't Rust
Anti rust Bolt Down Molded Block Terminals

Specifications:

Frequency Response: 10Hz - 30KHz
S/N Ratio: >95dB
Minimum THD: Damping Factor: >150 at 100Hz
Input Voltage: 280mV - 7V
Channel Separation: >45dB
Input Impedance: 15K
Dimensions 6.7" W x 2" H x 10.8" L
Color: Black

Some Popular Configurations:

4 full range speakers and 2 or 4 subwoofers
8 full range speakers and 2 or 4 subwoofers
8 full range speakers (one per channel)
16 full range speakers (2 per channel)
(4) subwoofers
Combination of midrange speakers and tweeters
Combination of subwoofers, full range speakers, and tweeters
This also has an adjustable input mode switch which means if you only have 2 sets of RCA outputs on your receiver then you can still run 4 or 8 channels off of your receiver.

Package Includes:

Amplifier
80A External Fuse
Birth sheet with Tested Power
Mounting Hardware
Warranty Card
Owner?s Manual