Description

Are you being driven crazy by stubborn and stuck bearings? It's over!

With its precision craftsmanship and heavy-duty 45# and chromoly steel construction, this 16-piece bearing removal set by Orion Motor Tech will remove even the most stubborn axles, wheel bearings, and bushings without damaging them. Insert the appropriate collet, turn the nut to expand it, and slide the hammer's weight towards the handle to knock out the bearing. Galvanized U-shaped counterstays can be fixed and tightened to slowly pull your bearing out of alignment. A slide hammer puller set with 10 collets that work with axles, bearings, and bushings between 1/4 and 2-1/3 inch diameter (6-59 mm) is included with this set. Everything is organized and easy to transport and store in the reinforced blow-molded case.

Get your problem solved with this inner bearing puller set!

Features

INCLUDES 16 SIMPLE TOOLS: This blind bearing puller set by Orion Motor Tech contains a single slide hammer, a counterstay puller, spare pin bolts, 3 screw adapters, and 10 split collets.

HEAVY-DUTY CONSTRUCTION: The collets on these wheel bearing removal tools are made from chrome moly steel to handle even the most stubborn blind bearings and bushings without slipping.

WIDE APPLICATION: A comprehensive internal bearing puller set, including expandable collets and threaded screw adapters, allows for the removal of tight bearings, axles, and bushings from a wide variety of vehicles without damaging them.

FEEL COMFORTABLE: Fit the collet, lock it into the inner race, and pull the slide hammer's weight back to easily knock out bearings or bushings; for tighter or more delicate operation, you can slowly tighten the counterstay to remove the part more carefully.

FITTED BLOW-MOLDED CASE: The custom blow-molded case keeps everything organized and easy to carry.

Specifications

45# steel, chrome molybdenum steel, zinc, black oxide

The case measures 18.6 x 14.3 x 4.1 inches. (47.2x36.2x10.4 cm)

The sliding hammer fits M10x1.5 screw sleeves

The counterstay is fitted with a M16 screw bar, a M10x1.5 screw, and a 12mm hexagon head

The following screw adaptors are available: M10x1.5, M10x1.5 to M8x1.25, and M10x1.5 to M6x1
The split collets range from 1/4 to 1/2 in. (6-13 mm), 2/5 to 2/3 in. (10-17 mm), 3/5 to 7/8 in. (15.5-22 mm), 7/8 to 1-1/8 in. (22-29 mm), 1-1/8 to 1-1/3 in. (28.5-35 mm), 1-2/5 to 1-1/2 in. (35.5-39 mm), 1-1/2 to 1-3/4 in. (38.5-45 mm), 1-3/4 to 1-9/10 in. (42.5-49 mm), 1-9/10 to 2-1/6 in. (48.5-55 mm), 2-1/10 to 2-1/3 in. (52.5-59 mm)
Total Weight: 14.3 lb. (6.5 kg)

Package List

A slide hammer 

Puller for counterstays

Adaptors for three screws 

Collets split into 10 pieces

Spare pin bolt

There is one storage case included